FORM
English

Product selection

Choosing an R‑20 generation: structure, fit and care

Compare R‑20 generations 1–4

Pick two generations for the question you want to answer. Start with 1 and 2 for size, or 3 and 4 Standard for internal geometry. The dimensions below come from public references. The descriptions refer to our reconstructed cutaways.

Outer length × widest point / inner length
Generation and reference dimensionsWhat to compare
Generation 1190 × 70 / 165 mmLonger channel, with oval bumps near the opening and a gradual transition to the rear chamber.
Generation 2135 × 74 / 120 mmShorter and wider overall. Look for fine grooves near the front and a narrower passage before the rear chamber.
Generation 3165 × 72 / 140 mmLook at the mix of textures and how the rear rings approach the main restriction.
Generation 4 Standard165 × 68 / 127 mmCompare the angled ridges and the two restrictions that separate the channel and rear chamber.

The cutaways come from public references. Local wall thickness and internal details are model estimates. Share actual cleaning, drying, or storage times in the discussion. Public dimensions and reference images

Open synchronized 3D comparison

Confirm the version before checking fit

This comparison covers generations 1, 2, 3 and 4 Standard. Check generation 4 Soft separately. Use the generation, Standard or Soft marking, and batch on your own packaging.

Public reference dimensions
The table gives outer length, widest point and inner length from public references. FORM has not physically measured each item.
Reconstructed 3D models
Cutaways follow reference images. Local wall thickness, restrictions and hidden details are estimates for understanding the geometry.
Fit still needs checking
Interface depth, latch position, assembly direction and removal results are still needed to establish accessory compatibility.
Sources and updates

Compiled by FORM · Sources checked 2026-11-19. Add packaging details, measurement conditions or source corrections in a reply.

View the original

This thread accompanies the FORM R‑20 archive, which compares generations one, two, three and the standard fourth-generation model. The cutaways are reconstructions from public references. Wall thickness and details deeper inside the model are estimates. If you are comparing two generations, share the exact versions and what difference matters most to you. If you have used one, tell us what came up during cleaning, drying or storage and what you tried.

Replies

No replies yet.